美国惭翱鲍碍贰狈调心滚子推力轴承
调心滚子推力轴承是作用轴向可分离单方向
美国惭翱鲍碍贰狈轴承球面滚子推力轴承自对准作为它们的球面滚子上轴和座圈的滚道球体运行。
因此,他们能够很好地适应错位的错误和轴部分以*的方式弯曲英寸
美国惭翱鲍碍贰狈球面滚子推力轴承通过朝向中心轴的接触角传递力。因此,它们能够容纳一些径向力非常久远的高轴向载荷。但是,必须考虑并代理径向力不得高于施加的轴向力的大约55%。
惭翱鲍碍贰狈球面滚子推力轴承
![]() | Spherical roller thrust bearings Spherical Roller Thrust Bearings are separable single direction acting axial bearings (see sketch below). Spherical roller thrust bearings are selfaligning as their spherical rollers run on the spheroid raceways of shaft and housing washers. Therefore they are well able to accommodate errors of misalignment and some shaft bending in an optimum way. Spherical roller thrust bearings transmit forces via a contact angle towards the centre axis. Thus, they are able to accommodate some radial forces along with high axial loads. But, it must be considered that the actingradial forces must not exceed approximay 55 % of the applied axial forces. |
![]() |
||
|
||
![]() |