🍓🍓麻豆精品㊙️国产传媒

955E系列，eBrik LDT模拟输出
955 eBrik II线性位移传感器（LDT）是一种，可编程的零和跨度，自调谐，非接触式线性位置传感器，采用经济实惠的薄型封装。该传感器利用我们经过现场验证的磁致伸缩技术提供位置，可重复感应距离的0.001％。 955 eBrik II?是一种经济的线性感应解决方案。流线型的阳极氧化铝挤压器容纳传感元件和电子元件。磁体移动到确定位置的感测元件上，并将其转换为可读输出。 955 eBrik II是一个独立的单元，没有“罐头”或头部组件。所有的电子装置都装在传感器中，传感器小于1英寸高。 955 eBrik可以从1英寸到74英寸长的1英寸增量订购。磁体滑块被设计成沿着导轨中的传感器轻松移动，或者浮动磁体组件可以位于单元上方。应用包括：压力机，注射成型，舞蹈控制，轮胎和橡胶等等。
95系列，Brik Gen III
95 Brik线性位移传感器（LDT）是一种，可编程的零和跨度，非接触式线性位置传感器，采用经济实惠的薄型封装。 Brik是一个独立的单元，没有罐头或头组件。所有的电子装置都装在小于1英寸高的传感器中。它具有模拟输出。 95 Brik可以订购，长度范围为5英寸至180英寸，增量为0.1英寸。磁体滑块被设计成沿着导轨中的传感器轻松移动，或者浮动磁体组件可以位于单元上方。应用包括：压制，注塑，挤出，辊定位，舞蹈控制，轮胎和橡胶等。
955厂系列，智能叠谤颈办
955S智能Brik线性位移传感器（LDT）是一种，可编程的零和跨度，非接触式线性位置传感器，采用经济实惠的薄型封装。 Brik是一个独立的单元，没有罐头或头组件。所有的电子装置都装在小于1英寸高的传感器中。它具有模拟输出。 955S Smart Brik可以订购，长度从4英寸到180英寸，增量为0.1英寸。磁体滑块被设计成沿着导轨中的传感器轻松移动，或者浮动磁体组件可以位于单元上方。应用包括：压制，注塑，挤出，辊定位，舞蹈控制，轮胎和橡胶等。

955尝颁系列叠谤颈办
955LC BRIK线性位移传感器（LDT）是一种经济，低调包装中的非接触式线性位置传感器。 BRIK是一个独立的单元，没有罐头或头部组件。所有的电子装置都装在小于1英寸高的传感器中。它可用于电压或电流输出。单位可以从6英寸到180英寸长，以0.1英寸的增量订购。磁体滑块被设计成沿着导轨中的传感器轻松移动，或者浮动磁体组件可以位于单元上方。磁体滑块设计成可以沿着导轨中的换能器轻松移动。
955C系列，Brik Gen III
955CA BRIK Gen III线性位移传感器（LDT）是一种经济，低调包装的可编程，自动调谐，非接触式线性位置传感器。位置传感器利用我们现场验证的磁致伸缩技术给出位置，可重复的可编程感应距离的.006％。流线型的阳极氧化铝挤压器容纳传感元件和电子元件。该单元设计用于安装在气缸的顶部，并检测气缸内的可移动磁体。可以使用电压，电流，数字和正交输出。
955顿系列，数字叠谤颈办第叁代
955D Brik线性位移传感器（LDT）是一种经济，低调包装中的非接触式线性位置传感器。 Brik是一个独立的单元，没有罐头或头组件。所有的电子装置都装在小于1英寸高的传感器中。 955D可用于数字（启动/停止，PWM和控制脉冲）输出。 Brik可以订购从5英寸到180英寸长的跨度长度，增量为0.1英寸。磁体滑块被设计成沿着导轨中的传感器轻松移动，或者浮动磁体组件可以位于单元上方。应用包括：压制，注塑，木材，挤出，辊定位，舞蹈控制等等。
955顿蚕系列，数字正交叠谤颈办第叁代
955DQ Brik线性位移传感器（LDT）是一种的非接触线性位移传感器，具有经济，
GEMCO线性位移传感器，GEMCO 955型传感器

-

• 

   

  955E Series, eBrik LDT Analog Output

  • The 955 eBrik II Linear Displacement Transducer (LDT) is an accurate, programmable zero and span, auto-tuning, non-contact linear position sensor in an economical, low-profile package. The sensor utilizes our field-proven Magnetostrictive technology to provide absolute position, repeatable to .001% of the sensing distance. The 955 eBrik II™ is a cost effective linear sensing solution. The streamlined anodized aluminum extrusion houses the sensing element and electronics. The magnet moves over the sensing element that determines the position and converts it to a readable output. The 955 eBrik II is a self-contained unit and does not have a “can” or head assembly. All of the electronics are incorporated in the sensor, which is less than one inch tall. The 955 eBrik can be ordered in span lengths from 1 inches to 74 inches long in 1 inch increments. The magnet slide is designed to move effortlessly along the sensor in guide tracks or a floating magnet assembly can be positioned above the unit. Applications include: Presses, injection molding, dancer control, Tire & Rubber and many more.

• 

   

  95 Series, Brik Gen III

  • The 95 Brik Linear Displacement Transducer (LDT) is an accurate, programmable zero and span, non-contact linear position sensor in an economical, low profile package. The Brik is a self-contained unit and does not have a can or head assembly. All of the electronics are incorporated in the sensor which is less than one inch tall. It is available with analog outputs. The 95 Brik can be ordered in span lengths from 5 inches to 180 inches long in 0.1 inch increments. The magnet slide is designed to move effortlessly along the sensor in guide tracks or a floating magnet assembly can be positioned above the unit. Applications include: Presses, injection molding, extrusion, roll positioning, dancer control, Tire & Rubber and many more.

• 

   

  955S Series, Smart Brik

  • The 955S Smart Brik Linear Displacement Transducer (LDT) is an accurate, programmable zero and span, non-contact linear position sensor in an economical, low profile package. The Brik is a self-contained unit and does not have a can or head assembly. All of the electronics are incorporated in the sensor which is less than one inch tall. It is available with analog outputs. The 955S Smart Brik can be ordered in span lengths from 4 inches to 180 inches long in 0.1 inch increments. The magnet slide is designed to move effortlessly along the sensor in guide tracks or a floating magnet assembly can be positioned above the unit. Applications include: Presses, injection molding, extrusion, roll positioning, dancer control, Tire and Rubber and many more.

• 

   

  955LC Series Brik

  • The 955LC BRIK Linear Displacement Transducer (LDT) is an accurate, non-contact linear position sensor in an economical, low profile package. The BRIK is a self-contained unit and does not have a can or head assembly. All of the electronics are incorporated in the sensor which is less than one inch tall. It is available with voltage or current outputs. Units can be ordered in span lengths from 6 inches up to 180 inches long in 0.1 inch increments. The magnet slide is designed to move effortlessly along the sensor in guide tracks or a floating magnet assembly can be positioned above the unit. The magnet slide is designed to move effortlessly along the transducer in guide tracks.

• 

   

  955C Series, Brik Gen III

  • The 955CA BRIK Gen III Linear Displacement Transducer (LDT) is an accurate programmable, auto tuning, non-contact, linear position sensor in an economical, low profile package. The position sensor utilizes our field proven Magnetostrictive technology to give absolute position, repeatable to .006% of the programmable sensing distance. The streamlined anodized aluminum extrusion houses the sensing element and electronics. The unit is designed to mount on top of a pneumatic cylinder and detect the movable magnet within the cylinder. It can be ordered with voltage, current, digital and Quadrature outputs.

• 

   

  955D Series, Digital Brik Gen III

  • The 955D Brik Linear Displacement Transducer (LDT) is an accurate, non-contact linear position sensor in an economical, low profile package. The Brik is a self-contained unit and does not have a can or head assembly. All of the electronics are incorporated in the sensor which is less than one inch tall. The 955D is available in digital (Start/Stop, PWM and Control Pulse) outputs. The Brik can be ordered in span lengths from 5 inches to 180 inches long in 0.1 inch increments. The magnet slide is designed to move effortlessly along the sensor in guide tracks or a floating magnet assembly can be positioned above the unit. Applications include: Presses, injection molding, lumber, extrusion, roll positioning, dancer control and many more.

• 

   

  955DQ Series, Digital Quadrature Brik Gen III

  • The 955DQ Brik Linear Displacement Transducer (LDT) is an accurate, non-contact linear position sensor in an economical, low profile package. The Brik is a self-contained unit and does not have a can or head assembly. All of the electronics are incorporated in the transducer which is less than one inch tall. The 955DQ is available with Quadrature outputs. This new method of interfacing Magnetostrictive transducers offers an interface as common as analog but with the speed and accuracy of pulsed type signaling. The Gemco 955DQ linear transducer provides quadrature output directly from the transducer to the controller. The output from the transducer can be wired directly to any incremental encoder input card, without the need for a special converter module or a PLC interface card designed specifically for use with a pulsed output Magnetostrictive transducer. The Brik can be ordered in span lengths from 5 inches to 180 inches long in 0.1 inch increments. The magnet slide is designed to move effortlessly along the transducer in guide tracks or a floating magnet assembly can be positioned above the unit. Applications include: Presses, injection molding, lumber, extrusion, roll positioning, dancer control and many more.