🍓🍓麻豆精品㊙️国产传媒

厂翱狈翱罢贰颁数字指示器和校准器
数字指示器，SENSORMASTER和TRANS CAL
数字指示器接收来自称重传感器的测量信号，并将它们转换成在显示器上显示。根据功能范围的不同，这些仪器已经可以帮助您分析测量信号，并且可以将评估的测量数据传输到更别的控制环境。显示屏上的极限设置和视觉报警是处理传感器信号的便利功能。便携式指示器和校准器为您直接在您的生产环境中执行自己的设备测试和校准提供了一种直接的方式，而无需长时间的停产。
SENSORMASTER 9163
使用应变式传感器进行力，压力或扭矩测量
用电位计或DC / DC传感器进行距离或角度测量
0.1％的测量精度和传感器特定的线性化
数学函数的范围（例如差分测量）
OK / NOK反馈在多色显示器上，并通过4个报警限制输出
高采样率（500次/秒）
9163数字指示器涵盖了需要测量，显示，分析和传输到更别控制系统的过程值的各种应用。
TRANS CAL 7281便携式高精度校准器和用于机械和电气测量的测试设备
兼容的传感器：应变计/归一化信号±5 V，±10 V，电位传感器
设备测试：高达±50 mV / V的应变仪模拟器
通过Burster TEDS轻松配置
出色的线性度，误差仅为&辫濒耻蝉尘苍;0.001％
锄耻颈多可存储16个测量程序
数据记录仪可存储多达30,000个测量值
DAkkS /工厂校准证书可用于仪器或整个测量链，包括8527参考传感器（可选）
多用途7281 TRANS CAL测试设备可用于需要执行高精度，现场校准用于压力机，扭矩工具或压力调节系统等设备的传感元件的场合。
厂翱狈翱罢贰颁数字指示器和校准器种类及功能

DIGITAL INDICATORS AND CALIBRATORS

DIGITAL INDICATORS, SENSORMASTER AND TRANS CAL

Digital indicators receive the measurement signals from their load cells and convert them for presentingon a display. Depending on their range of functions, these instruments already help you to analyse your measurement signals and can transfer the evaluated measurement data to the higher-level control environment. Limit-setting and visual alarms on the display are convenient features for handling sensor signals. Portable indicators and calibrators provide a straightforward means for you to perform your own device testing and calibration directly in your production environment without lengthy production downtimes.

SENSORMASTER 9163

• For force, pressure or torque measurements using strain gage sensors
• For distance or angle measurements with potentiometric or DC/DC sensors
• Measurement accuracy of 0.1 % and sensor-specific linearization
• Range of mathematical functions (e.g. differential measurement)
• OK/NOK feedback on multicolour display and via 4 alarm limit outputs
• High sampling rate (500/sec.)

The 9163 digital indicator covers a wide range of applications in which process values need to be measured, displayed, analysed and transferred to higher-level control systems.

TRANS CAL 7281 portable high-precision calibrator and testing device for mechanical and electrical measurements

• Compatible sensors: Strain-gage/normalized signal ±5 V, ±10 V, potentiometric sensors
• Equipment test: strain-gauge simulator up to ±50 mV/V
• Easy configuration by burster TEDS
• Excellent linearity with an error of just ±0.001 %
• Storage of up to 16 measurement programs
• Data-logger for up to 30.000 measured values
• DAkkS/factory calibration certificate available for the instrument or the entire measurement chain including 8527 reference sensor (optional)

The multipurpose 7281 TRANS CAL testing device can be used wherever there is a need to perform highprecision, in-situ calibrations of sensing components used in equipment such as presses, torque tools or pressureregulating systems.

厂翱狈翱罢贰颁数字指示器和校准器种类及功能