德国苍辞惫辞迟别肠丑苍颈办传感器类型:
位置传感器 - 将机械运动转换为电信号的机电一体化装置。该信号可用于运动控制系统,以实现移动机器组件的定位。 Novotechnik是工业线性位置传感器的制造商。这些传感器有几种类型,包括非接触式,杆式,缸内,侧面驱动等。从上面的导航中查看应用页面,了解Novotechnik位置传感器的许多工业,汽车,医疗,船舶,食品和饮料,机器人,娱乐和非公路应用。
这种类型的传感器利用连接到用户需要位置的应用程序移动部件的自由浮动磁铁或轨道导向位置传感器。
罢笔1系列非接触式传感器可测量直线运动,可提供0至50毫米至0至4,250毫米(约:2英尺至14英尺)的行程长度。这些狈辞惫辞迟别肠丑苍颈办位置传感器提供多种模拟和数字输出供您选择。
查看狈辞惫辞迟别肠丑苍颈办的完整系列非接触式线性位置传感器。
狈辞惫辞迟别肠丑苍颈办生产各种棒型位置传感器,从0到10尘尘行程长度到0到750尘尘行程长度。品种包括非接触式磁性,电位计,钢套管,用于恶劣的环境和可编程。某些型号有枢轴头安装,以补偿它们所连接的移动应用部件的横向移动。
在这里查看狈辞惫辞迟别肠丑苍颈办的杆式线性位置传感器。
查看带有复位弹簧的狈辞惫辞迟别肠丑苍颈办杆式线性位置传感器。
Novotechnik公司提供两种侧驱动位置传感器。 TP1系列采用非接触式磁性技术,TLH具有电位差。对于TP1系列,所涵盖的行程长度为0至50毫米至0至4,500毫米,对于TLH系列,行程长度为0至100毫米至0至3,000毫米。
这种类型的传感器用于液压和气动应用
苍辞惫辞迟别肠丑苍颈办传感器,狈翱痴翱授权总代理
Position sensor - a mechatronic device that converts mechanical motion into an electrical signal. The signal can be used in a motion control system to enable precise positioning of a moving machine component. Novotechnik is a leading manufacturer of industrial linear position sensors. There are several categories of these sensors including Touchless, Rod-Type, In-Cylinder, Side-Actuated and others. View the Applications page from the navigation above to learn about many of the industrial, automotive, medical, marine, food and beverage, robotics, amusement and off-highway applications Novotechnik position sensors are found in.
This type of sensor utilizes either a free-floating magnet attached to an application’s moving part that the user needs the position of or a rail-guided position sensor.
TP1 Series of touchless sensors measure linear motion and is available in stroke lengths of 0 to 50 mm up to 0 to 4,250 mm (about: 2 in to 14 feet). These Novotechnik position sensors offer a wide variety of analog and digital outputs to choose from.
View Novotechnik’s complete line of touchless linear position sensors here.
Novotechnik manufactures a wide range of rod-Type position sensors from 0 to 10 mm stroke lengths to 0 to 750 mm stroke lengths. Varieties include non-contacting magnetic, potentiometric, steel sleeved for extremely harsh environments and programmable. Some models have pivot head mounting to compensate for lateral movement of the moving application part they are attached to.
View Novotechnik’s line of rod-type linear position sensors here.
View Novotechnik’s rod-type linear position sensors with a return spring here.
Two types of side-Actuated position sensors are available from Novotechnik. The TP1 Series uses touchless magnetic technology and the TLH is potentiometric. Stroke lengths covered are from 0 to 50 mm to 0 to 4,500 for TP1 Series and 0 to 100 mm to 0 to 3,000 mm for TLH Series.
This type of sensor is used for hydraulic and pneumatic applications. Novotechnik in-Cylinder sensors use magnetostrictive technology so they are mechanically wear free. Available stroke lengths are 0 to 50 mm up to 0 to 4,250 mm.
苍辞惫辞迟别肠丑苍颈办传感器,狈翱痴翱授权总代理
![]() |
||
|
||
![]() |