🍓🍓麻豆精品㊙️国产传媒

全国统一热线:021-32205893
设备中心您的位置:网站首页 >设备中心 >
痴滨厂插装阀厂痴搁0.厂08.00.贵00技术特点
更新时间:2018-08-30   点击次数:1393次

意大利VIS SVR0.S08阀门系列

SAE墨盒 - 350巴

NC单锁先导操作 - 提升式

描述

电磁操作,2路2位,常闭,先导

提升式,旋入式插装阀。

通常用作高压的阻塞或负载保持装置

电路。 当线圈断电时,SVR0.S08作为检查

阀门允许自由流量从2到1,而阻塞从1到2。

当线圈通电时,提升阀抬起并打开1至1

2和2到1个流动路径。

采用单件式车身的刚性设计有助于大限度地减少车身

腔内偏心的影响,提供了很大的可靠性。

优化的流路可降低压降。

技术特点

所有外表面均镀锌,耐腐蚀。

所有阀门部件均由高强度钢制成。 提升得以硬化

和磨削,确保小的磨损和延长的使用寿命。

线圈密封保护🍓🍓麻豆精品㊙️国产传媒系统。

手动覆盖选项。

工业厂础贰共同腔。

痴滨厂插装阀厂痴搁0.厂08.00.贵00技术特点

SVR0.S08 Valve Series

SAE Cartridge - 350 bar
NC Single Lock Pilot Operated - Poppet Type

Description
Solenoid operated, 2-way 2-positions, normally closed, piloted    
poppet type, screw-in cartridge valve.    
Typically used as a blocking or load holding device for high pressure
circuits. When the coil is de-energized, the SVR0.S08 acts as check
valve allowing free flow from 2 to 1, while blocking from 1 to 2.
When the coil is energized the poppet lifts and opens both the 1 to
2 and the 2 to 1 flow paths.
The rigid design using a 1-piece body contributes to minimize the
effect of eccentricities in cavity and provides great reliability.
Low pressure drop thanks to optimized flow path.

Technical Features
All external surfaces are zinc plated and corrosion-proof.
All valve parts are made of high strength steel. Poppet is hardened
and ground to ensure minimal wear and extended service life.
Coil seals protect the solenoid system.
Manual override options.
Industry SAE common cavity.

痴滨厂插装阀厂痴搁0.厂08.00.贵00技术特点

COPYRIGHT @ 2016 🍓🍓麻豆精品㊙️国产传媒     网站地图       GoogleSitemap    对于我们 新闻中心 产物中心 联系我们

电话:
021-32205893
手机:
13795311448
传真:
021-52500777
 

推荐收藏该公司网站