🍓🍓麻豆精品㊙️国产传媒

全国统一热线:021-32205893
设备中心您的位置:网站首页 >设备中心 >
骋贰贵搁础狈杰弗伦罢颁系列称重传感器授权总代理
更新时间:2018-12-19   点击次数:967次

骋贰贵搁础狈杰弗伦称重传感器概观

罢颁系列称重传感器是应变计传感器,用于测量静态和动态应用中的负载,拉伸和压缩,高精度(工业称重,实验室测试,自动化等)。

罢颁系列由单块金属加工而成,因此主要传感元件,安装件和外壳不包含焊缝,允许更小的尺寸和更高的防护等级。

具有8个应变仪的测量点的配置减少了由于不的负载施加而导致的误差。

并联连接的称重传感器的典型应用是:料仓,料斗,大型称重平台,以及带有合适附件的悬挂负载。

不锈钢结构适用于化学和石化行业的恶劣环境。

描述

测量范围:100至20,000公斤

准确度等级:0.2%

全不锈钢结构

耐腐蚀

内部生成的校准信号

防护等级:IP67(DIN 40050)

骋贰贵搁础狈杰弗伦罢颁系列称重传感器授权总代理

Show tc

Overview

TC series load cells are strain gauge transducers used to measure loads in static and dynamic applications, in tension and compression, with high accuracy (industrial weighing, laboratory testing, automation, etc).

The TC series is machined from a single block of metal, so the primary sensing element, the mountings and the case contain no welds allowing smaller dimensions and an enhanced grade of protection.

The configuration of the point of measurement, with 8 strain gauges, reduces errors caused by imperfect application of the load.

Typical applications of load cells connected in parallel are: silos, hoppers, large weighing platforms, and with suitable accessories, suspended loads.

The stainless steel construction is suitable for use in aggressive environments in the chemical and petrochemical industries.

Description

  • Range of measurement: from100 to 20,000 Kg
  • Accuracy class: 0.2%
  • All stainless steel construction
  • Corrosion resistant
  • Internally generated calibration signal
  • Grade of protection: IP67 (DIN 40050)

骋贰贵搁础狈杰弗伦罢颁系列称重传感器授权总代理

COPYRIGHT @ 2016 🍓🍓麻豆精品㊙️国产传媒     网站地图       GoogleSitemap    对于我们 新闻中心 产物中心 联系我们

电话:
021-32205893
手机:
13795311448
传真:
021-52500777
 

推荐收藏该公司网站